\
Sahashi BrothersXceed RCXceed speed refuelling

> Search Results

> 121-130 of 788

ZX12 DS6 EdoMod

Part Nr.: #201036

The Xceed ZX-12 DS6 EdoMod engine is an evolution of the ZX-12 DS5 2012 spec. ABC set and combustion chamber have been redesigned. The components have been “hand modified” by Edoardo using his extensive experience and many.
 Durability and reliability are also of the highest level thanks to our many years of experience in 2 stroke engines,. The Xceed ZX-12 EM delivers great power over the entire rpm range, with very good fuel efficiency, with special attention given to mid range acceleration due to the increased traction from the latest generation of 1/10th touring chassis'. The Xceed ZX-12 DS6 EM is supplied with: a 12mm 'turbo' silicone-filled crankshaft for improved fuel flow and reduced weight, super aligned 'knife edged' aerodynamic connecting rod, hand finished hard chromed brass liner with tear-drop work on the ports, lightened CNC machined piston made from high percentage silicone alloy billet, large size finned turbo combustion chamber insert for better heat dissipation, new ultra light weight cooling head with Xceed graphics , hand modified rear back plate for improved fuel flow, Swiss quality 12mm main bearing and a composite slide carburetor with 5.4mm venturi inserts.

View product >>>

Table-stand for tyre-glueing holder OFR 1/8

Part Nr.: #103271

Table-stand for tyre-glueing holder OFR 1/8

View product >>>

Tyre-glueing holder and stand set OFR 1/8

Part Nr.: #103272

Tyre-glueing holder and stand set OFR 1/8

View product >>>

Nitromax-16 instrument 16%

Part Nr.: #103060

Nitromax-16 instrument 16% EFRA tool to check the nitro-content of the fuel. Floater system. Only small upper tip may protrude the fuel surface, at 20 degrees Celcius (=F-68) fuel and outside temp.

View product >>>

Toe in setup plate universal

Part Nr.: #103063

Toe in setup plate universal

View product >>>

Vacuum Tyre Soaker comboset with Alum case

Part Nr.: #103267

Xceed Vacuum Tyre Soaker comboset with Alum case

View product >>>

Set-up set for 1/8 OFR and GT

Part Nr.: #103074

Xceed introduces this superb set-up set for 1/8 scale offroad cars, buggy/ e-buggy, truggy/e-truggy, GT/ Gt-e. The set is made from high quality aluminium parts with clear engraving and green anodising, strong engraved transparent top-plate, quick release nuts and top quality fasteners, spacers and bearings. Fast and easy to measure caster, camber / camber rise, steering throw geometry and front and rear toe. Full color assembly manual included. It all comes in a durable black transport bag, sporting the Xceed logo, to keep this instrument well protected after use !

View product >>>

Ride height tool 1/10 and 1/12

Part Nr.: #103067

Ride height tool for 1/10 TC and 1/10 and 1/12 scale pan cars Strong, light and durable aluminium ride height tool. Laser engraved with height from 2.0 up to 6.0 in 0.2mm steps each. Xceed logo engraved on the side.

View product >>>

Setup block / ride height tools off-road (3)

Part Nr.: #103066

Set-up tools for offroad cars, buggy and truggy. Strong and durable aluminium set-up blocks for offroad use in set of 2. These stand will keep your buggy or truggy well placed while doing set-up work on your car. These are 40mm high and 80mm long, in Xceed X-shape. Green anodized with Xceed engraved logo’s. Lightweight aluminium ride height tool for offroad use. Laser engraved with height from 0 to -20 in 1mm steps each. Xceed logo engraved on the side. Set-up block (2) and ride-height gauge available separate and as set

View product >>>

Ride height tool off-road

Part Nr.: #103065

Lightweight aluminium ride height tool for offroad use. Laser engraved with height from 0 to -20 in 1mm steps each. Xceed logo engraved on the side.

View product >>>

> Refine your Search